S.1 Safe Work
11
[ 2.3 ]
Unpacking and cleaning
(1) Parts are coated with rust-preventive oil. Take
necessary action so they will not slip when
carrying them.
(2) When washing parts, use waterproof paper to
prevent the floor from becoming stained.
(3) Use Nippon Oil Corporation's New-sol Deluxe
or equivalent cleaning fluid. Never use trichlo-
roethylene-base cleaning fluid; otherwise, the
painting will peel off or discolor.
(4) Never put anything on the parts storage area,
passages, or footing area.
[ 2.4 ]
Levelling work
(1) When using a small jack, apply it to two points
underneath the front and back cloth rails and
make sure that it catches them securely.
(2) When conducting a group effort, agree before-
hand on words or gestures for giving and con-
firming signals.
(3) Whenever inserting fiber packings under the
bottom of the machine’s feet or removing them
during the levelling work, never let fingers get
between the packings and the floor.
[ 2.5 ]
Wiring work
(1) Never allow non-qualified workers to carry out
connection or disconnection of the primary
power lines.
(2) Before starting wiring work, be sure to check
that the main circuit breaker is open and the
warning notice (tag) is put up for all to see.
(3) Before starting wiring work, be sure that the
line is not active.
(4) Check that the plant power grounding line is
connected to the PE terminal in the control
box.
(5) Check the wiring and connection for no abnor-
mality.
