Owners Information
5
5055.64-A
TCHF.22bodyA_ 090617-36
TCHF.22STbodyA
HeliFire 360 multi orientational helical flame fire feature.
HeliFire 360 Specifications
Your zero-clearance HeliFire 360 fire feature has been professionally installed by:
Dealer name: _____________________________________________
Phone Number: ___________________________________________
If you discover any problems with your HeliFire 360 fire feature contact your dealer immediately to have the
unit repaired.
Caution: Do not attempt to repair the HeliFire 360 fire feature because you may cause injury to yourself or
others, and risk causing damage to the unit.
Before operating your HeliFire 360 fire feature carefully read this manual and pay close attention to all Safety
Warnings. The manual contains important information on the unit’s safe operation and maintenance.
Congratulations on your purchase
of a Town & Country HeliFire 360 Feature
Figure 1: HeliFire 360.
•
22,000 BTU/hr input (fixed input) Natural Gas.
•
16,500 BTU/hr input (fixed input) Liquid Propane Gas
•
Natural gas or Liquid Propane Gas.
•
24VAC honeywell direct ignition valve system.
•
Power vented only. Either flush mounted power vent
(TCVT.PVFMA) or Surface mounted power vent (TCVT.PVSMA)
must be used. Vent extension kit (TCVT.PVEXTA) contains 2
lengths of 25 foot flexible venting pipe plus adaptors. All of
the above items are sold separately.
•
Maximum combustion air intake venting length is 50’ and
maximum flue venting length is 50’.
•
4” collinear flex venting (1/4” clearance required).
•
Multi exhaust position venting adaptors (1 position intake, 3
position exhaust).
•
HeliFire 360 unit is all 304 stainless steel construction.
•
Zero clearance unit (non-combustible board not required).
•
One sided and two sided (see through) units available.
•
Units fit within a 2” x 6” stud wall.
•
Outdoor flashing option.
