PIREG 545 cUL Operators Guide 2021
48
4. Press the
or
button to enter the fourth digit →press the Enter
button
≡
to accept the entry. (
not the Menu scroll button
)
Upon pressing the Enter button
≡
to accept the current password the
controller advances to Security Protection menu 411. If an incorrect
password is entered the controller will remain in Security Protection
menu 410.
It is possible to change the password for any level even when that level
is locked. The new password will be accepted.
7.2.11. Security Protection menu 411: Level 1, set new password function
SECURITY PROTEC. 411
Enter new
Level 1 password:
PASSWORD: 0000
In Security Protection menu 411 the new password for Level 1 is to be
entered.
The new password is set per digit. To enter the new password, begin by
pressing either the
or
button. Four zeros (“0000”) will appear flash-
ing with the first digit shaded. Once this occurs, follow the keystrokes
below enter and accept the new password:
1. Press the
or
button to enter the first digit →press the Menu
scroll button
2. Press the
or
button to enter the second digit →press the Menu
scroll button
3. Press the
or
button to enter the third digit →press the Menu
scroll button
4. Press the
or
button to enter the fourth digit →press the Enter
button
≡
to accept the entry. (
not the Menu scroll button
)
Upon pressing the Enter button
≡
to accept the new password the pass-
word display changes to “ * * * * “. Press the Menu Scroll button
to
return back to Security Protection menu 401.
7.2.12. Security Protection menu 412: Level 2, function selection
SECURITY PROTEC. 412
Level 2 password:
LOCK
(LOCK/UNLOCK/CHANGE)
Security Protection menu 412 is the home screen for the Level 2 pass-
word protection. Press the
buttons to select the desired command
and accept by pressing the Enter button
≡
. Then press the Menu scroll
button
to advance to the next Security Protection menu for Level 2.
- with “LOCK” selected controller advances to Security Protection
menu 413.
- with “UNLOCK” selected controller advances to Security Protection
menu 414.
- with “CHANGE” selected controller advances to Security Protection
menu 416.
Note:
To lock any level the operator must first “Change” the
factory password “0000” and establish a new password.
To return back to the Security Protection menu 401 without making any
changes press the Menu scroll button
twice.
7.2.13. Security Protection menu 413: Level 2, locking function
SECURITY PROTEC. 413
Enter Level 2
password to LOCK
PASSWORD: 0000
Security Protection menu 413 allows the operator to password protect
(lock) the Level 2. The symbol
/
indicates the lock and unlock state
of the settings level. The start value from the factory is “0000“. This
“0000” will be displayed until a new password has been entered, then “
* * * * “ will be displayed.
The password is set per digit. To enter the password, begin by pressing
either the
or
button. Four zeros (“0000”) will appear flashing with
the first digit shaded. Once this occurs, follow the keystrokes below en-
ter and accept the password:
1. Press the
or
button to enter the first digit →press the Menu
scroll button
2. Press the
or
button to enter the second digit →press the Menu
scroll button
3. Press the
or
button to enter the third digit →press the Menu
scroll button
4. Press the
or
button to enter the fourth digit →press the Enter
button
≡
to accept the entry. (
not the Menu scroll button
)
