PIREG 545 cUL Operators Guide 2021
46
7.2.5. Security Protection menu 405: Settings Level, changing password function
SECURITY PROTEC. 405
Enter current
settings password:
PASSWORD: 0000
Security Protection menus 405 and 406 allows the operator to change
the Settings level password from an existing password to a new pass-
word. In Security Protection menu 405 the current password is entered.
The start value from the factory is “0000“. This “0000” will be displayed
until a new password has been entered, then “ * * * * “ will be displayed.
The current password is set per digit. To enter the current password,
begin by pressing either the
or
button. Four zeros (“0000”) will
appear flashing with the first digit shaded. Once this occurs, follow the
keystrokes below enter and accept the current password:
1. Press the
or
button to enter the first digit →press the Menu
scroll button
2. Press the
or
button to enter the second digit →press the Menu
scroll button
3. Press the
or
button to enter the third digit →press the Menu
scroll button
4. Press the
or
button to enter the fourth digit →press the Enter
button
≡
to accept the entry. (
not the Menu scroll button
)
Upon pressing the Enter button
≡
to accept the current password the
controller advances to Security Protection menu 406. If an incorrect
password is entered the controller will remain in Security Protection
menu 406.
It is possible to change the password for any level even when that level
is locked. The new password will be accepted.
7.2.6. Security Protection menu 406: Settings Level, set new password function
SECURITY PROTEC. 406
Enter new
settings password:
PASSWORD: 0000
In Security Protection menu 406 the new password is to be entered.
The new password is set per digit. To enter the new password, begin by
pressing either the
or
button. Four zeros (“0000”) will appear flash-
ing with the first digit shaded. Once this occurs, follow the keystrokes
below enter and accept the new password:
1. Press the
or
button to enter the first digit →press the Menu
scroll button
2. Press the
or
button to enter the second digit →press the Menu
scroll button
3. Press the
or
button to enter the third digit →press the Menu
scroll button
4. Press the
or
button to enter the fourth digit →press the Enter
button
≡
to accept the entry. (
not the Menu scroll button
)
Upon pressing the Enter button
≡
to accept the new password the pass-
word display changes to “ * * * * “. Press the Menu Scroll button
to
return back to Security Protection menu 401.
7.2.7. Security Protection menu 407: Level 1, function selection
SECURITY PROTEC. 407
Level 1 password:
LOCK
(LOCK/UNLOCK/CHANGE)
Security Protection menu 407 is the home screen for Level 1 password
protection. Press the
buttons to select the desired command and
accept by pressing the Enter button
≡
. Then press the Menu scroll but-
ton
to advance to the next Security Protection menu for Level 1.
- with “LOCK” selected controller advances to Security Protection
menu 408.
- with “UNLOCK” selected controller advances to Security Protection
menu 409.
- with “CHANGE” selected controller advances to Security Protection
menu 410.
Note:
To lock any level the operator must first “Change” the
factory password “0000” and establish a new password.
To return back to the Security Protection menu 401 without making any
changes press the Menu scroll button
twice.
