Toshiba TR PMIU, Руководство пользователя, Страница: 95 / 182

85
5 5 5 5. . . .3 3 3 3. . . .4 4 4 4
Toshiba Inverter Tags
You can control/monitoring inverter, or change value of parameters.
Step 1. Set INV parameters. You need to communication setting (F800 -), command mode selection (Cmod)
and frequency setting mode selection (Fmod). Cmod decides what commands RUN/Stop,
Forward/Reverse, etc. to INV. Fmod decides what commands output frequency to INV.
Step 2. Set COM port (COM1 or COM2) as Toshiba inverter protocol, and add inverter as node (refer 4.3.5).
Note that the communicating settings should be same to the settings of inverter.
Step 3. Open Tag database, Add Tag Window. Select inverter in “Node Name”, then you can select the data
of inverters from “Register/Coil Type”.
Step 4. Use added tags. Note that inverter tags cannot use in ladder logic block. We recommend following
procedure.
Global task
Copy Tag B to Tag A
Inverter
Data to INV
Data from INV
Unit tags INV tags
PMIU unit
Select Node of
Inverter
Select item that you
refer/control
Select tag number