Toshiba TR PMIU Скачать руководство пользователя страница 130

Страница: 130 / 182

120

Template Screen

The object arranged on Template screen is displayed most

downward (back side) on all other screens.

One template screen can be applied to two or more base

screens,

and

the

same

objects

(arranged

template

screen) are displayed on the applied Base screen.

Therefore, the design of a common part to two or more

screens can be finished by one time. When you change a

common part, it only has to change 1 template screen (Many

Base screens need not be changed).

All Template screens are in “Template” folder (Not “Screen folder”). Template

screen can create up to 10.

Popup screen has only “Name” and ”Number” properties in “Design” properties.

When you edit base screen that template screen is applied, you can not edit the objects of template. To edit

these, open template. And, you should be careful so that the object of the base screen does not overlap with

the object of the template screen.

Base screen has “Templates” in screen properties. Select “Yes” in “Use

Template”, and set the number of applied templates to "No of Templates".

“Template

1”

“Template

x”

number

specified

“No

Templates”) shows the order of overlapping Template screens. You can

change the overlapping order by changing template screen.

In the following example, the order of overwrapping is changing according to the order of template 1 and 2.

Содержание TR PMIU























































































































































































Результаты поиска

Содержание TR PMIU

Отзывы:

Toshiba TR PMIU, Руководство пользователя, Страница: 130 / 182

Результаты поиска

Содержание TR PMIU

Отзывы: