Toshiba TR PMIU, Руководство пользователя, Страница: 65 / 182

55
1 1 1 1
. Select Menu
2 2 2 2 . Select instruction
3 3 3 3
. Click to arrange
3 3 3 3. . . .3 3 3 3. . . .4 4 4 4
Input ladder circuit
To arrange instruction, select instruction from
menu, and click place in ladder edit area where
you arrange instruction. If there is no enough
space, you cannot arrange the instruction.
Delete existing instruction to make space
enough to arrange the instruction.
When you select ladder instruction, Instruction
properties is displayed the right side of ladder
editing area. You can set detail of instruction.
When you right click in ladder editing area, following menu is displayed.
Duplicate Block The same block as a current block is created.
Delete Block Delete current block.
Close Block Close window of current block.
Copy All Instructions Copy all the instruction in each Rung/Line.
Paste Paste object of clipboard.
Select All Objects Select all instructions of current block.
Show Rung Comment Comment of current rung is displayed.
Insert Rung Insert rung right above of current rung.
Delete Rung Delete current rung.
Insert Line Insert line right above of current line.
Delete Line Delete current line.
Find \ Replace Find (search) and replace operand or instruction
by instruction type or operand address.
When you input the circuit that steps over the
line (self-holding circuit etc.), note that
vertical brunch cannot be stepped over by a
Rung. It is necessary to install 1 circuit on 1
Rung.
Replace
Instruction
Find
Instruction