Toshiba TR PMIU Скачать руководство пользователя страница 162

Страница: 162 / 182

152

USB Data Log Upload task (From USB memory to PMIU unit)

This is a kind of extra task. You can upload logged data in background task (unit does not stops) without TR

PGMS, and can select Data/Time of the logged data to upload. About detail, refer

6.2.4.

Insert USB memory device to USB Host port at first, then execute the task. If task settings (Start/End

Date/Time, file name) are set correctly, task is done and the logged data is saved in USB memory device as

CSV file (Tab spread type).

USB Download (From USB memory to PMIU unit)

Step 1.

You should prepare the project file to upload. Open the project for upload, and save as the name

“TRP0500A” to USB memory. If the name is different, the operation is not done.

Step 2.

Insert the USB memory to USB HOST port of PMIU unit, then turn ON S0037 (USB host menu

trigger).

Step 3.

Select “Yes” in “Confirm Operation” window. If you select “No”, or when you left the unit for several

seconds, unit reboots automatically and switches to HALT mode.

Step 4.

Select “Download” in “Confirm Operation” window. Note that when you left the unit for several

seconds, unit reboots automatically and switches to HALT mode.

Step 5.

Upload options is displayed. Select item to download to PMIU unit. If you select “Exit”, the unit

reboots automatically and switches to HALT mode.

Here are 4 items for upload, Application, Firm ware, Fonts, Ladder. Select the item.

Step 6.

Select item to download, then operation is started automatically. Note that this operation overwrites

the project file in PMIU unit.

Step 7.

When the download operation is finished, unit displays confirmation window, and back to download

options menu. If you download 2 or more items, select item and repeat operation.

Step 8.

If you have finished downloading necessary items to PMIU unit, select “Exit” from download options

menu to quite USB Host mode. PMIU unit reboots automatically and switches to HALT mode.

Содержание TR PMIU























































































































































































Результаты поиска

Содержание TR PMIU

Отзывы:

Toshiba TR PMIU, Руководство пользователя, Страница: 162 / 182

Результаты поиска

Содержание TR PMIU

Отзывы: