Toshiba TR PMIU Скачать руководство пользователя страница 145

Страница: 145 / 182

135

Label text color

Set label text color.

Language

Select display language of object.

Style

Select the direction where the bar gets longer.

Real Time Trend

This object displays only the data of register tag while object is displayed. Display is refreshed every second

automatically. Note that past data cannot be referred to, and the plotting of the data is started after this object

is displayed.

・

Appearance

Background Color

Set background color of object.

Error Message Font Color

Set the color of error message font.

Font

Set font size.

Grid

If No, grids of graph area are not displayed.

Grid color

Set grid color.

Label

If Yes, display label of object.

Label Font

Set label text font.

Label Text Color

Set label text color.

Language

Select display language of object.

Span

Set span of time scale axis.

Time

The span of time scale is fixed to set value. Set span time.

Tag Selected

Set the span of time scale by the value of tag. unit is Second (if the value is 120, span

of time scale is 120 sec = 2 minutes).

・

Tag Attributes

This object can display only the real-time data of register tag.

Number of Tags

Set number of tag that you display. Up to 4.

Selected Tag Color

Set display color of selected tag.

Tag Address

Select the register tag to display by tag number.

Tag Name

Select the register tag to display by tag name.

Tag Selected

Select tags for setting this property.

・

Value Properties

Maximum

Max

Set maximum value of Y (value) axis scale by fix value.

Tag

Set maximum value of Y (value) axis scale by the value of register tag.

Minimum

Min

Set minimum value of Y (value) axis scale by fix value.

Tag

Set minimum value of Y (value) axis scale by the value of register tag.

Number of Grids

Set number of Y (value) axis grids.

Содержание TR PMIU























































































































































































Результаты поиска

Содержание TR PMIU

Отзывы:

Toshiba TR PMIU, Руководство пользователя, Страница: 145 / 182

Результаты поиска

Содержание TR PMIU

Отзывы: