Toshiba TR PMIU Скачать руководство пользователя страница 6

Страница: 6 / 182

Disposal

Never dispose of electrical components (including TR series) via incineration. It generates a poisonous gas, and

there is danger to which the fire and the explosion. And, this deteriorations the law in many cases, pollutes the

global environment.

When you dispose TR series, handle TR series as industrial waste. Contact environmental agency for details on

disposal of electrical components and packaging in your area.

Exemption matters

We do not assume the responsibility of the following damage at all.

・

Damage caused because natural disasters such as fires, earthquakes, and other accidents.

・

Damage due to fault and misuse of user or third party, use on abnormal condition.

・

Damage because of use or being not able use of TR (such as loss at business profit and chance),

interruption of business, change and disappearance etc. of memory content.

・

Damage caused by having combined with other equipment such as malfunction etc.

・

Damage caused by not having observed content of this manual.

・

Damage caused by combination with project that customer made, sample program described in this manual,

or program that modifies it.

About this manual

This manual is described about TR SPUX series logic controller and TR PGMS01 programming software. Please

read well before using. When you use sample program described in this manual, confirm safety enough. We do

not take responsibility for the result that executed a sample program listed in this manual at all.

Content of this manual can use only for purpose of obtaining method of technology necessary for using of TR

series. This manual is protected by the copyright, and the reproduction, reprint, etc. of the content without

permission are prohibited. The content might be changed without a previous notice for the improvement.

TR series product and this manual is designed for the person that has the skills and knowledge relating to the

construction, installation, operation, and maintenance of the electrical equipment and has received safety

training on the hazards involved (Refer to the latest edition for additional safety requirements).

Содержание TR PMIU























































































































































































Результаты поиска

Содержание TR PMIU

Отзывы:

Toshiba TR PMIU, Руководство пользователя, Страница: 6 / 182

Результаты поиска

Содержание TR PMIU

Отзывы: