Toshiba TH180, Инструкция по эксплуатации

Страница: 17 / 80

STE 73995
– 16 –
TRANSPORTATION AND INSTALLATION MANUAL
Section 2
Installation
2.1 Installation Environment
Table 2.1 shows the environmental conditions for the location in which the TH series
Robot and TS1000 controller are to be installed.
Table 2.1 Environmental conditions for robot and controller
Item Specifications
In operation : 0 to 40°C Temperature
In storage : –10 to 50°C
Humidity 20 to 90 % (Non-condensing)
DO NOT install the robot where it may be subject to fluids
such as water.
Altitude 1000 m or less
In operation : 0.98m/s
2
or less Vibration
In transport : 9.8m/ s
2
or less
Dust No inductive dust should exist.
Consult with Toshiba Machine first if you wish to use the
robot and controller in a dusty environment.
Gas No corrosive or combustible gas should exist.
Sunlight The robot and controller should not be exposed to direct
sunlight.
Power noise A heavy noise source should not exist nearby.
Magnetic field A heavy magnetic field source should not exist nearby.
!
DANGER
• Do not place the robot or controller near combustible. Doing so could lead
to fires if it ignites due to a fault, etc.