Toshiba SD-22VB, Руководство по обслуживанию

Страница: 6 / 111

16
This VCR has one built-in tuner to
receive broadcasts. Before you
record a TV broadcast, you must set and
preset all channels. This VCR can preset
up to 80 channels.
Tuning the TV Stations Manually
Preparation
• Turn on the TV, and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will
light)
Example: Preset the BBC 2 on programme position 2.
1
Press VCR MENU.
Press
▲
or
▼
to select the
CHANNEL SETUP. Then
press ENTER.
2
Press
▲
or
▼
to select the
CH TUNING.
Press ENTER to select CH
TUNING screen.
3
Press (falling frequency) or (rising frequency)
once to start the search. It stops at each broadcast
automatically ("
"
changes to " "). Press
or repeatedly until
BBC 2 appears. Only in
case of receiving a weak
broadcast (drifting
picture), does search fail
to stop. If you want to
stop, press or .
Press ENTER to preset.
The search menu screen
will disappear if the next
mode is not activated in
less than 50 seconds.
4
Press
▲
or
▼
repeatedly
until 2 is displayed. (Or
enter 0 2 with the 1 to 0
numbered keys). Then
press ENTER.
5
Repeat the steps 3 and 4 to preset other TV stations.
6
Press VCR MENU repeatedly until the TV picture
appears on the screen.
CH 01
CH 02
CH 03
CH 04
CH 05
CH 06
BBC 1
BBC 2
ITV
CH4
CH5
SATELLITE
SEARCH :
EXIT : MENU
CH 1
CH 1
EXIT : MENU
CH : / 0Ð9
OK : ENTER
Note:
Occasionally, the auto search might catch
a weak signal and stop. If the TV station
signal is weak, you shouldn't store this
station.
In that case restart the auto search
using
or .
CH 2
EXIT : MENU
SEARCH :
OK : ENTER
SELECT :
CHANNEL SETUP
ENTER
EXIT
: ENTER
: MENU
VCR SETUP
AUTO REPEAT OFF
SYSTEM SETUP
TIMER REC SET
SELECT :
CH TUNING
ENTER
EXIT
: ENTER
: MENU
GUIDE CH SET
CHANNEL SETUP
SLOW PAUSE/STILL
SET Ð
INDEX Ð SKIP INDEX +
SET UP
VCR MENU
ENTER
CANCEL VIDEO Plus+
A-B RPT
INSTANT SKIP
ZERO RETURN
TITLE
SET +
CH +
CH Ð
OPEN/CLOSE
ANGLE
COUNTER RESET
AUDIO
AUDIO SELECT
SUBTITLE
ATR
PLAY MODE
SP/LP
DISPLAY
CALL TIMER REC
CLOCK
COUNTER
DVD VCR
ZOOM
AUX TV/VCR
MEMORY
REC/OTR RETURN
E.A.M
MENU
PLAY
REW FWD
STOP
17
Preparation
• Turn on the TV, and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will
light)
Example: Satellite channel has been incorrectly stored on
channel 8 of your VCR.
1
Press VCR MENU. Press
▲
or
▼
to select the CHANNEL
SETUP. Then press ENTER.
2
Press
▲ or ▼
to select the
GUIDE CH SET. Then press
ENTER.
3
Enter "SAT" with
▲
or
▼
or
number keys.
Then press ENTER.
4
Enter "6" with
▲
or
▼
or
number keys.
Then press ENTER.
If you have connected your
satellite using the scart
socket, you must select "AV"
for the VCR CH number.
5
For other Codes, repeat steps 3 and 4.
6
Press VCR MENU repeatedly until the TV picture ap-
pears.
The TV stations must be stored according
to the tuning guide given on page 13,
otherwise the VIDEO Plus+ feature will not
work. If for any reason you did not select
channels BBC1, BBC2, ITV, CH4, CH5 and
Satellite in channel positions 1 through to 6
respectively, you must set each VIDEO Plus+
channel number (GUIDE CH) manually.
SET : / 0-9
GUIDE CH SET
GUIDE
6
VCR
CH CH
8
OK
EXIT
: ENTER
: MENU
SET : / 0-9
GUIDE CH SET
GUIDE
6
VCR
CH CH
6
CLEAR
OK
: CANCEL
: ENTER
EXIT : MENU
TV
STATION
BBC1
BBC2
ITV
CH4
CH5
Satellite
1
2
3
4
5
6
GUIDE CH
GUIDE CHANNEL TABLE
Setting the VIDEO Plus + ® Channel Number (Guide CH)
SELECT :
CHANNEL SETUP
ENTER
EXIT
: ENTER
: MENU
VCR SETUP
AUTO REPEAT OFF
SYSTEM SETUP
TIMER REC SET
SELECT :
CH TUNING
ENTER
EXIT
: ENTER
: MENU
GUIDE CH SET
CHANNEL SETUP
SLOW PAUSE/STILL
SET –
INDEX – SKIP INDEX +
SET UP
VCR MENU
ENTER
CANCEL VIDEO Plus+
A-B RPT
INSTANT SKIP
ZERO RETURN
TITLE
SET +
CH +
CH –
OPEN/CLOSE
ANGLE
COUNTER RESET
AUDIO
AUDIO SELECT
SUBTITLE
ATR
PLAY MODE
SP/LP
DISPLAY
CALL
TIMER REC
CLOCK
COUNTER
DVD VCR
ZOOM
AUX TV/VCR
MEMORY
REC/OTR RETURN
E.A.M
MENU
PLAY
REW FWD
STOP
18
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its
beginning, the cassette tape will be ejected automatically.
Loading and Unloading a Cassette Tape
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Cover the hole with a piece of adhesive tape.
To record again
Screwdriver
Press EJECT on the unit. Even if a tape is being
played, press this button only once. Remove the cassette tape.
Loading
Push the centre of the tape until it is automatically
inserted. Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Unloading
1 2
Use only video cassette tapes marked and .
• Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording
is not possible with this model.
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS
recordings with regular VHS resolution.
• HQ VHS is compatible with existing VHS equipment.
• SQPB playback can be seen only at PAL SP mode.
Erase prevention tab Adhesive tape
Erase prevention tab
S P
S M H
VCR
VCR
S P
S M H
VCR
SP
CH
19
Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
1
2
Press PLAY.
Playback will start.
If the cassette has not loaded
yet,
will blink for 4 seconds.
To start playback
Press STOP.
To stop playback
To rewind the tape or forward it rapidly
Stop the playback or recording with STOP.
To rewind the tape:
Press REW.
To forward the tape:
Press FWD.
To stop the tape-winding, press STOP. To switch to playback
directly (without
3
), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press REW or FWD and hold
it down. The unit will resume the tape winding as soon as the
button is released.
• This VCR selects the playback tape
speed SP or LP automatically.
• The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR or DVD, the tape playback
and DVD playback alternate with each
other on the screen.
Preparation:
• Turn on the TV, and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will light)
NTSC video cassette playback
When using a pre-recorded NTSC video cassette tape, the
connected TV set must operate with a 60 Hz vertical frequency.
Otherwise the on-screen picture will be affected by vertical
rolling. Even if your VCR set is capable of processing NTSC video
signals, the picture may be shortened vertically (appearance of
black bars at the top and at the bottom of the TV screen). The
dubbing of a NTSC video cassette tape to a standard PAL VCR
is not possible.
Cassette tape playback
SLOW PAUSE/STILL
SET –
INDEX – SKIP INDEX +
SET UP
VCR MENU
ENTER
CANCEL VIDEO Plus+
A-B RPT
INSTANT SKIP
ZERO RETURN
TITLE
SET +
CH +
CH –
OPEN/CLOSE
ANGLE
COUNTER RESET
AUDIO
AUDIO SELECT
SUBTITLE
ATR
PLAY MODE
SP/LP
DISPLAY
CALL TIMER REC
CLOCK
COUNTER
DVD VCR
ZOOM
AUX TV/VCR
MEMORY
REC/OTR RETURN
E.A.M
MENU
PLAY
REW FWD
STOP
VCR
S P
S M H
VCR
S P
S M H