Toshiba SD-22VB, Руководство по обслуживанию

Страница: 39 / 111

DISASSEMBLY INSTRUCTIONS
B1-1
1.
1-1:
Fig. 1-1
REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
TOP CABINET AND FRONT CABINET
(Refer to Fig. 1-1)
1.
2.
3.
4.
5. Remove the 5 screws
1
.
Remove the Top Cabinet in the direction of arrow (A).
Disconnect the following connectors: (CP681, CP601).
Unlock the 8 supports
2
.
Remove the Front Cabinet in the direction of arrow (B).
1-2: DISPLAY PCB AND OPERATION 1/2 PCB
(Refer to Fig. 1-2)
1.
2. Remove the 11 screws
1
.
Remove the Display PCB and Operation 1/2 PCB in the
direction of arrow.
1.
2.
Open Flap to 90˚ and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
Then lift in direction of arrow (C).
Fig. 1-2
Fig. 1-3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Make the short circuit on the position as shown Fig. 1-4
using a soldering. If you remove the Deck CD with no
soldering, the Laser may be damaged.
Disconnect the following connectors:
(CP503,CP8001, CP8002).
Remove the 4 screws
1
.
Remove the Deck Angle in the direction of arrow (A).
Remove the 2 screws
2
.
Remove the Front-DVD Shield in the direction of arrow
(B).
Remove the 4 screws
3
.
Disconnect the following connectors: (CP2601, CP2602
and CP2603).
Remove the Deck CD in the direction of arrow (C).
Remove the 4 screws
4
.
Remove the DVD PCB in the direction of arrow (D).
1-4: DECK CD AND DVD PCB (Refer to Fig. 1-4)
2 DVD PCB
1
2 4
Deck CD
(C)
(D)
Deck Angle
Front-DVD Shield
3
(A)
(B)
1
1
1
3
3
3
4
4
4
Make the sort circuit
using a soldering.
Pick Up PCB
Fig. 1-4
1
1
2
Top Cabinet
Front Cabinet
1
1
(A)
2
2
2
2
2
(B)
1
2
2
1-3: FLAP (Refer to Fig. 1-3)
1
Operation 1 PCB
Front Cabinet
1
1
1
1
1
1
1
1
1
1
Operation 2 PCB
Display PCB
(A)
(B)
(C)
Flap
NOTE
When the installation of the Deck CD, remove all the
soldering on the short circuit position after the connection of
Pick Up PCB and DVD PCB connector.