background image

User’s Manual

7-1

HW Setup

Chapter 7

HW Setup

This chapter explains how to use the TOSHIBA HW Setup program to 

configure your computer, and provides information on settings for various 

functions.

Accessing HW Setup

Start, point to All Programs, point to TOSHIBA, point to Utilities and click 

HWSetup.

HW Setup Window

The HW Setup window contains the following tabs: General, 

Password,Display, Boot Priority, Keyboard, LAN, and USB.
There are also these three buttons:

General

This window displays the BIOS version and contains two buttons:

Setup

This field displays BIOS Version and date.

OK

Accepts your changes and closes the HW Setup 

window.

Cancel

Closes the window without accepting your 

changes.

Apply

Accepts all your changes without closing the 

HW Setup window.

Default

Return all HW Setup values to the factory 

settings.

About

Display the HW Setup version.

When finish BIOS update, please restart your computer and press 

F2

 into 

BIOS setup manual and load BIOS default one time.

Содержание PQX31U-00U00C





























































































































































































































Отзывы: