Toshiba PQX31U-00U00C Скачать руководство пользователя

Страница: 123 / 220

User’s Manual

6-4

Power

To ensure that the battery pack maintains its maximum capacity, operate

the computer on battery power at least once a month until the battery pack

is fully discharged - please refer to

Extending battery life

in this chapter for

details of the procedure.
If the computer is continuously operated on AC power through connection

to an AC adaptor for an extended period, for example more than a month,

the battery may fail to retain a charge, it may not function efficiently over its

expected life and the

Battery

indicator may not properly indicate a low-

battery condition.

Real Time Clock battery

The Real Time Clock (RTC) battery provides power for the internal real

time clock and calendar function and also maintains the system

configuration while the computer is turned off. If the RTC battery becomes

completely discharged, the system will lose this information and the real

time clock and calendar will stop working - in this instance the following

message will be displayed when you turn on the power:

■

The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the

battery as required by local ordinances or regulations. Use only

batteries recommended by TOSHIBA as replacements.

■

Always use the battery pack supplied as an accessory or an equivalent

battery pack specified in the User's Manual. Other battery packs have

different voltage and terminal polarities. Use of non-conforming battery

packs could generate smoke or cause fire or rupture, possibly resulting

in serious injury.

■

Always dispose of used battery packs in compliance with all applicable

laws and regulations. Put insulating tape, such as cellophane tape, on

the electrode during transportation to avoid a possible short circuit, fire

or electric shock. Failure to do so could possibly result in serious injury.

■

Do not remove the battery pack while the computer is in Sleep Mode.

Data is stored in RAM, so if the computer loses power it will be lost.

When the computer is powered off in Sleep Mode, and the AC adaptor

is not connected, the battery pack supplies power to maintain data and

programs in memory. If the battery pack is completely discharged,

Sleep Mode will not function and the computer loses all data in

memory.

ERROR 0271: Check date and time

settings.
WARNING 0251: System CMOS checksum bad -

Default configuration used.
Press <F1> to resume, <F2> to Setup.

Содержание PQX31U-00U00C





























































































































































































































Результаты поиска

Содержание PQX31U-00U00C

Отзывы:

Похожие инструкции для PQX31U-00U00C

Бренды по названию

Популярные бренды

Toshiba PQX31U-00U00C, Руководство пользователя

Результаты поиска

Содержание PQX31U-00U00C

Отзывы:

Похожие инструкции для PQX31U-00U00C

Бренды по названию

Популярные бренды