background image

COPYRIGHT

© Copyright 1999 Fujitsu PC Corporation. All rights
reserved. No part of this publication may be copied,
reproduced, or translated, without prior written consent
of Fujitsu PC Corporation. No part of this publication
may be stored or transmitted in any electronic form
without the written consent of Fujitsu PC Corporation.

Fujitsu PC Corporation disclaims liability for any inac-
curacies, errors, omissions, or future changes.

Fujitsu and the Fujitsu logo are registered trademarks,
and LifeBook and Quick Point are trademarks of
Fujitsu Limited.

Built for Humans is a trademark of Fujitsu 
PC Corporation.

The following are registered trademarks of
IBM Corporation: IBM, IBM PC AT, IBM PS/2.

The following are registered trademarks of
Microsoft Corporation: MS, MS-DOS, Windows,
Windows 98 Second Edition, Windows NT.

PCMCIA is a trademark of the Personal Computer
Memory Card International Association.

Intel and Celeron are registered trademarks of
Intel Corporation.

PC-Doctor is a trademark of Watergate Software, Inc.

LapLink Professional is a registered trademark of
Traveling Software Inc.

McAfee VirusScan is a registered trademark of NAI.

All other trademarks mentioned herein are the property
of their respective owners.

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name: Fujitsu PC Corporation

Address: 598 Gibraltar Drive

Milpitas, CA 95035

Telephone: (408) 935-8800

Declares that product: Model: LifeBook B142.

Complies with Part 15 
of the FCC Rules.

This device complies with Part 15 of the FCC rules.
Operations is subject to the following two conditions:
(1) This device must not be allowed to cause harmful
interference, (2) This device must accept any inter-
ference received, including interference that may cause
undesired operation.

David Woo

Fujitsu

5/21/99

 





Summary of Contents for Lifebook B142

















































































































Reviews: