User’s Manual
4-5
Operating Basics
Setup Procedure
Please use the following procedure when first using fingerprint
authentication.
Fingerprint Registration
You should initially enroll the required authentication data using the
Fingerprint Enrollment
Wizard.
1. To run this program, click
Start
All Programs
TrueSuite Access
Manager
TrueSuite Access Manager
.
2. The
Verify
screen will be displayed, enter the Windows logon password
and click the
Next
button.
3. On the
User's Fingers
screen click the box above the finger you wish
to register.
If any of the previously enrolled fingerprints is selected again, the latest
information will be enrolled and any previous information over-written.
4. The
Fingerprint Enrollment
screen will be displayed and the tutorial
will begin. First click "Replay video" and confirm the proper movement
for the finger you wish to register. Then confirm the message displayed
on this screen and ensure that there is a check mark in the
Run
Interactive Tutorial
box. Once this has been done, click
Next
.
5. At the
Scanning Practice
screen, you are able to practice swiping
(three times) your finger to ensure you use the correct method. Click
"Try again" to if you wish to practice again. You have finished practicing,
click
Next
button.
6. Register your fingerprint on the
Fingerprint Image Capture
screen.Let
the computer read the finger to be registered 3 times. An image of your
fingerprint will be shown on the screen each time the fingerprint is
successfully read.
Once the fingerprint is successfully read for the third time, the message
Successfully combined
will be displayed beneath the
fingerprint images and will close the window automatically.
■
In use, the fingerprint authentication system will use the same
username and password as defined within the Windows operating
system. If no Windows password has been configured, you must do
this before starting the fingerprint registration process.
■
This sensor has the memory space for at least twenty-one fingerprint
patterns. You might be able to register more fingerprint patterns
depending on the sensor memory usage.
You are also able to start the Fingerprint Enrollment Wizard by using the
following method:
■
Right-click the TrueSuite Access Manager icon in the Taskbar and
choose Open.
It is strongly recommended that you register 2 or more fingerprints.
Repeat the procedure from step 3 to register another fingerprint.
