Toshiba GRL100-101A, Инструкция по эксплуатации

Страница: 147 / 392

⎯
146
⎯
6 F 2 S 0 8 3 5
4.2.3.3 Displaying Disturbance Records
Details of disturbance records can be displayed on the PC screen only (*); the LCD displays only
the recorded date and time for all disturbances stored in the relay. To display them, do the
following:
(*) For the display on the PC screen, refer to RSM100 manual.
•
Open the top "MENU" screen by pressing any keys other than the VIEW and RESET
keys.
•
Select 1 (= Record) to display the "Record" sub-menu.
•
Select 3 (= Disturbance record) to display the "Disturbance record" screen.
1 = y
/ 2
r e c o r
i s l
D
p
2 = C l e a r
i s u D t r b a n c e d
•
Select 1 (= Display) to display the date and time of the disturbance records from the top in
new-to-old sequence.
/ 3 D i s t u r b a n c e r e c o r d 3 /12
# 1 1 6 / O c t / 1 9 9 7 1 8 : 1 3 : 5 7 . 0 3 1
# 2 2 0 / S e p / 1 9 9 7 1 5 : 2 9 : 2 2 . 4 6 3
# 3 0 4 / J u l / 1 9 9 7 1 1 : 5 4 : 5 3 . 9 7 7
The lines which are not displayed in the window can be displayed by pressing the and
keys.
To clear all the disturbance records, do the following:
•
Open the "Record" sub-menu.
•
Select 3 (= Disturbance record) to display the "Disturbance record" screen.
•
Select 2 (= Clear) to display the following confirmation screen.
/ 2 D i s t u r b a n c e r e c o r d
C l e a r a l l d i s t u r b a n c e r e c o r d s ?
E N T E R = Y e s C A N C E L = N o
•
Press the ENTER (= Yes) key to clear all the disturbance records stored in non-volatile
memory.
4.2.3.4 Displaying Autoreclose Counts
The autoreclose output counts can be displayed or can be reset to zero as follows.
To display the autoreclose output counts on the LCD, do the following (for 200 series to 500
series models):
•
Select 1 (= Record) on the top "MENU" screen to display the "Record" sub-menu.
•
Select 4 (= Autoreclose count) to display the "Autoreclose count" screen.