Step
Figure
Discription
Remark
34
From the THERMINAL PCB ASSY
(UA11) to the MAIN PCB ASSY (
U001) Connected FPC remove
from the connector and pull out
the Cradle terminal from Main
Cover ASSY (AA01).
TERMINAL PCB ASSY (UA11)
does not separate yet at this time,
be careful not to cut FPC.
35
Remove the A325.
Remove the TERMINAL PCB
ASSY (UA11).
36
Remove the screws A326*2.
Remove the EMI Sheet A (A349)
and EMI Sheet B (A350).
37
Remove the screws A326*2.
Remove the SENSOR PCB ASSY
(U006) of FPC from the
connector.
38
Raise the MAIN PCB ASSY
(U001) and remove the connector
as shown.
Remove the MAIN PCB ASSY.
EMI Sheet C (A351) is separate at
this time, be careful not to lose.
39
Detach the MAIN PCB ASSY
(U001) and FLASH-MAIN FPC
(W999).
This work is unnecessary when
not exchanging the MAIN PCB
ASSY (U001) and FLASH-MAIN
FPC (W999).
40
Remove the EMI Sheet C (A351).
Remove the screws A332*4, A325
and Battery Case ASSY (AC11).
32
Содержание Gigashot GSC-R30
Страница 1: ...SERVICE MANUAL HARD DISK CAMERA FILE NO 400 200604GR GSC R60 GSC R30 CREATED IN JAPAN March 2006 S ...
Страница 12: ...2 Mechanical Parts 2 1 Explode Diagram GSC R60 11 ...
Страница 13: ...GSC R30 12 ...
Страница 58: ...GSC R60 GSC R30 ...