![background image](http://html.mh-extra.com/html/toshiba/e-studio222cp/e-studio222cp_user-manual_429095041.webp)
Menu functions > 41
OP MENU
(cont.)
FX EMULATION
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for FX
EMULATION category.
If DISABLE is selected, FX EMULATION
category of USERS MENU will not appear.
USB MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for USB
MENU category.
If DISABLE is selected, USB MENU category
of USERS MENU will not appear.
NETWORK MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
NETWORK MENU category.
If DISABLE is selected, NETWORK MENU
category of USERS MENU will not appear.
MEMORY MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
MEMORY MENU category.
If DISABLE is selected, MEMORY MENU
category of USERS MENU will not appear.
SYS ADJUST
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
SYS.ADJUST MENU category.
If DISABLE is selected, SYS.ADJUST MENU
category of USERS MENU will not appear.
MAINTENCE
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
MAINTENACE MENU category.
If DISABLE is selected, MAINTENANCE MENU
category of USERS MENU will not appear.
USAGE MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
USAGE MENU category.
If DISABLE is selected, USAGE MENU
category of USERS MENU will not appear.
CONFIG. MENU
NEARLIFE
STATUS
ENABLE
DISABLE
Set LCD panel control at the time of near-life
warning for drum, fuser and belt.
Enable: Display a near-life warning.
Disable: Do not display a near-life warning.
LIFE WARNING
ENABLE
DISABLE
If DISABLE is selected, the printer does not
display life warning after cover opening and
closing.
Display Condition: NEARLIFE STATUS is set
to DISABLE.
NEARLIFE LED
ENABLE
DISABLE
Enables/disables illumination of front
panel
LED when “near-end-of-life” warning of a
toner, drum, fuser, or belt occurs.
Attention LED is lit when setting is enabled,
inhibited when disabled.
ECO MODE
ON
OFF
When ON, if the machine is in power save
mode and you send a small print job (1 or 2
pages), the machine will print the job
without warming the fuser to the “normal”
operating temperature beforehand.
When you change the setting and exit the
Admin Menu, the machine will power cycle
then the following message is displayed
“PLEASE POWER OFF/ON”. Switch the power
off then turn the machine back on.
ITEM
SETTINGS
EXPLANATION
Содержание e-STUDIO222CP
Страница 1: ...Digital LED Colour Printer User s Guide ...
Страница 75: ...R101020J6400 TTEC 07113501 iss1 ...