Toshiba e-STUDIO222CP, Руководство пользователя

Страница: 38 / 75

Menu functions > 38
S
YS
A
DJUST MENU
Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU
of Administrator menu.
M
AINTENANCE MENU
This menu provides access to various printer maintenance functions.
ITEM SETTINGS EXPLANATION
X ADJUST +2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER Adjusts the position of a whole print image in the
direction perpendicular to the direction the paper runs,
that is horizontally, in 0.25 mm increments.
Any parts of the print image that are outside the
printable area as a result of this shift will be cropped.
Y ADJUST +2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER Adjusts the position of a whole print image in the
direction the paper runs, that is vertically, in 0.25 mm
increments.
Any parts of the print image that are outside the
printable area as a result of this shift will be cropped.
Corrections in a negative value are ignored in PS mode.
DUPLEX X ADJUST +2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER When printing the reverse page of a duplex job, adjusts
the position of the whole print image in the direction
that is perpendicular to the direction the paper runs,
that is horizontally, in 0.25 mm increments.
Any parts of the print image that are outside the
printable area as a result of this shift will be cropped.
DUPLEX Y ADJUST +2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER When printing the reverse page of a duplex job, adjusts
the position of the whole print image in the direction
the paper runs, that is vertically, in 0.25 mm
increments.
Any parts of the print image that are outside the
printable area as a result of this shift will be cropped.
Corrections in a negative value are ignored in PS mode.
DRUM CLEANING ON
OFF Sets whether to rotate the drum in idle prior to printing
in order to reduce any horizontal white lines.
CAUTION: Each additional rotation will shorten
the ID life by that amount.
HEX DUMP EXECUTE Prints out data received from the host PC in
hexadecimal Dump. Turning off the power supply
switch restores Normal Mode from HEX Dump Mode.
ITEM SETTINGS EXPLANATION
MENU RESET EXECUTE Resets menus to default settings.
SAVE MENU EXECUTE Saves the current menu settings. The last menu
executed is saved and the menu previously saved is
overwritten and erased.
When you press the OK button, the following
confirmation message is displayed.
ARE YOU SURE? YES/NO
If you select NO, the display returns to the previous
menu.
If you select YES, the current menu settings are stored
and the menu is exited.