![background image](http://html.mh-extra.com/html/toshiba/e-studio222cp/e-studio222cp_user-manual_429095036.webp)
Menu functions > 36
IPV4 ADDRESS
xxx.xxx.xxx.xxx
Current assigned IP address. To change, press OK and
use Menu buttons to increment 1st octet, then press
OK again to move on to next octet. When 4th octet has
been set, press OK again to register new address.
SUBNET MASK
xxx.xxx.xxx.xxx
Current assigned subnet mask. To change, proceed as
above.
GATEWAY ADDRESS
xxx.xxx.xxx.xxx
Current assigned gateway address. To change, proceed
as above.
WEB
ENABLE / DISABLE
Enables or disables Web config. facility.
TELNET
ENABLE / DISABLE
Enables or disables Telnet config. facility.
FTP
ENABLE / DISABLE
Enables or disables communication via FTP.
IPSEC
ENABLE / DISABLE
Sets Enable/Disable of IPSec. Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available.
SNMP
ENABLE / DISABLE
Enables or disables SNMP protocol.
NETWORK SCALE
NORMAL / SMALL
Selects network size.
When NORMAL is selected, printer can work effectively,
even when connected to a HUB that has a spanning
tree
feature. However, printer start up time gets longer
when computers are connected with two or three small
LANs.
When SMALL is selected, computers can cover from two
or three small LANs to a large LAN, but may not work
effectively when connected to a HUB that has a
spanning tree feature.
HUB LINK SETTING
AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Sets full or half duplex for communication via a network
hub.
When AUTO is set, negotiation is done automatically.
FACTORY DEFAULTS
EXECUTE
Reloads the settings present when the unit was setup
by the manufacturer.
ITEM
SETTINGS
EXPLANATION
Содержание e-STUDIO222CP
Страница 1: ...Digital LED Colour Printer User s Guide ...
Страница 75: ...R101020J6400 TTEC 07113501 iss1 ...