![background image](http://html.mh-extra.com/html/toshiba/e-studio222cp/e-studio222cp_user-manual_429095032.webp)
Menu functions > 32
PCL
EMULATION
This menu controls settings effective when the printer is operating in PCL emulation mode.
JAM RECOVERY
ON
OFF
Specifies whether the printer should perform jam
recovery after a paper jam has occurred. If ON, the
printer will attempt to re-print any pages lost due to a
paper jam once the jam has been cleared.
ERROR REPORT
ON
OFF
If ON, the printer will print error details when a
PostScript Emulation error occurs.
Note: Applies tp PS & PCL XL only.
ITEMS
SETTINGS
EXPLANATION
FONT SOURCE
RESIDENT /
RESIDENT2
Specifies the location of the PCL default font. Normally
this will be INTERNAL unless additional fonts are
installed in the expansion ROM slot or additional fonts
have been downloaded to RAM as permanent fonts.
FONT NO.
I0 ~ I90
Sets the current default font number from the currently
selected source.
FONT PITCH
0.44CPI~
10.00CPI~
99.99CPI
Sets the width of the PCL default font in characters/inch
(CPI).
Default font is the fixed-pitch, scalable font. The value
is displayed to the second decimal place
Displayed only when the font selected in Font No. is
fixed-spacing, scalable font.
FONT HEIGHT
4.00 POINT~12.00
POINT~999.75 POINT
Height of the PCL default font.
Note: This menu item is displayed only when the font
selected in Font No. is a proportional-spacing, scalable
font.
SYMBOL SET
PC-8
(Default Symbol Set
only shown)
PCL symbol set. If the font source and number are
changed to one which does not support the selected
symbol set, this must be changed to an available
symbol set for that font.
A4 PRINT WIDTH
78 COLUMN
80 COLUMN
Sets the number of columns subject to Auto LF with A4
paper in PCL. This is the value when Auto CR/LF Mode is
set to OFF with the 10CPI character.
WHITE PAGE SKIP
OFF / ON
Selects whether blank pages are printed or not.
CR FUNCTION
CR / CR+LF
Selects whether a received carriage return character
(0Dh) also causes a line feed.
LF FUNCTION
LF / LF+CR
Selects whether a received line feed character (0Ah)
also causes a carriage return.
PRINT MARGIN
NORMAL
1/5 INCH
1/6 INCH
Sets the non-printable page area. NORMAL is PCL
compatible.
TRUE BLACK
OFF / ON
Selects whether black image data is printed using black
toner (ON) or 100% CMY (OFF). (Valid in PCL emulation
mode only.)
ITEMS
SETTINGS
EXPLANATION
Содержание e-STUDIO222CP
Страница 1: ...Digital LED Colour Printer User s Guide ...
Страница 75: ...R101020J6400 TTEC 07113501 iss1 ...