![background image](http://html.mh-extra.com/html/toshiba/e-studio222cp/e-studio222cp_user-manual_429095031.webp)
Menu functions > 31
S
YS
CONFIG
MENU
This menu adjusts general printer settings to suit the way you prefer to work.
CMYK CONVERSION
ON
OFF
Setting to “OFF” will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function is
used.
Note: This function only applies to PS models
ITEMS
SETTINGS
EXPLANATION
POW SAVE TIME
e-S222CP
1 MIN
3 MIN
5 MIN
15 MIN
30 MIN
60 MIN
120 MIN
e-S262CP
1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
120 MIN
Adjusts the idling time before the printer automatically
switches into power saving mode. In this mode power
consumption is reduced to a low level required to just
keep the printer operating and ready to receive data.
When a job is sent the printer will require a warm-up
time of up to 1 minute before printing can begin.
SLEEP TIME
1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
120 MIN
e-STUDIO262CP only: Adjusts the power saving time
before the printer automatically switches into sleep
mode.
PERSONALITY
AUTO EMULATION
PCL
IBM PPR III XL
EPSON FX
PS3 EMULATION
This item selects which industry standard emulation
your printer should use. When set to AUTO, incoming
data is examined and the correct emulation is
automatically selected each time a print job is received.
USB PS-PROTOCOL
RAW
ASCII
Selects PostScript data format for USB port.
NET PS-PROTOCOL
RAW
ASCII
Selects PostScript data format for network port.
CLRABLE
WARNING
ONLINE
JOB
When ONLINE, non-critical warnings, such as requests
for a different paper size, can be cleared by pressing the
ON LINE button. When set to JOB, they are cleared
when the print job resumes.
AUTO CONTINUE
ON
OFF
Determines whether or not the printer will automatically
recover from a memory overflow condition.
MANUAL TIMEOUT
OFF
30 SEC
60 SEC
Specifies how many seconds the printer will wait for
paper to be fed before cancelling the job.
WAIT TIMEOUT
5~40 SEC~300, OFF
Specifies how many seconds the printer will wait when
received data pauses before forcing a page eject. In
PostScript Emulation mode the job will be cancelled if
timeout occurs.
LOW TONER
CONTINUE
STOP
Specifies whether the printer should continue printing
even after a low toner condition is detected.
ITEM
SETTINGS
EXPLANATION
Содержание e-STUDIO222CP
Страница 1: ...Digital LED Colour Printer User s Guide ...
Страница 75: ...R101020J6400 TTEC 07113501 iss1 ...