4. SYSTEM MODE (For Service Persons and System Administrators)
EO13-33005
4.4 Parametr Setting
4- 39
4.4.16 Beep Volume Setting (BEEP VOL)
This setting selects a beep volume. (Factory default is “1”.)
Notes:
1. When the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key
is pressed.
2. When the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after setting,
then stored in the backup memory.
4.4.17 XML Setting (XML)
This setting selects enable/disable of XML.
Notes:
y
When the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key
is pressed.
y
When the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
y
When the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
y
The change in the parameter setting becomes effective when the
[POWER]
key is pressed after setting,
then stored in the backup memory.
y
If the XML setting is ON (enabled), issue mode is automatically changed to TPCL. However, even when
this setting is changed to OFF (disabled), the issue mode does not change, i.e. TPCL is still selected.
* To use the re-issue function, the issue mode must be changed to TPCL1.
BEEP VOL OFF
[PAUSE]
BEEP VOL 1
[PAUSE]
The buzzer does not sound (no beep).
Low volume
BEEP VOL 2
[PAUSE]
BEEP VOL 3
[PAUSE]
High volume
XML OFF
XML ON
XLM setting is disabled. (Factory default)
XLM setting is enabled.
[PAUSE]
[FEED]
