4. SYSTEM MODE (For Service Persons and System Administrators)
EO13-33005
4.4 Parametr Setting
4- 38
4.4.14 Resume Printing After Broken Dots Error Setting (HEAD ERR PRT)
This setting selects whether or not the printer resumes printing after a broken dots error occurs.
Notes:
1. When the
[FEED]
key is pressed, the menu moves in the opposite direction from when the
[PAUSE]
key
is pressed.
2. When the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after setting,
then stored in the backup memory.
4.4.15 Feed To Top Of Feed After Cover Close Setting (FEED CHECK)
This setting selects whether or not the printer feeds the paper to the top of feed after the cover is closed.
Notes:
1. When the
[FEED]
key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the
[FEED]
and
[PAUSE]
keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the
[FEED]
key or
[PAUSE]
key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the
[POWER]
key is pressed after setting,
then stored in the backup memory.
5. The printer feeds the paper to the top of feed when the print mode is TPCL, TPCL1, or LABEL and a
sensor, transmissive or reflective is used.
HEAD ERR PRT OFF
HEAD ERR PRT ON
The printer does not resume printing after a broken dots error
occurs. (Factory default)
The printer resumes printing after a broken dots error occurs.
FEED CHECK OFF
FEED CHECK ON
The printer does not feed the paper to the top of feed.
(Factory default)
The printer feeds the paper to the top of feed.
[PAUSE]
[FEED]
[PAUSE]
[FEED]
