46
Other Digital TV features and settings
Parental Setup
The Parental Control feature allows you to block
programmes according to their rating levels� If a PIN has
been set, you will need to enter it before adjusting the
level�
1
From the
DTV Settings
menu, press
s
or
r
to
select
Parental Control
�
Parental Setup
None
Parental Control
Playback Setup
Enabled
2
Press
v
or
w
to choose the desired
Parental Setup
option�
•
None
,
Block all
,
Block G and above
,
Block
PGR and above
,
Block AO and above
�
To view blocked programmes, enter the PIN�
Playback Setup :
Use for the playback mode (if record)�
•
Enabled
,
Disabled
and
Every Time
Using the System Information
This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the
System Setup
menu, press
s
or
r
until
System Information
is selected�
2
Press
OK
to display the
System Information
�
TOSHIBA
System Information
2011
x.x.x.x Xxx xx 2011 - xx:xx:xx XX:xx
WEAK
Ch22
Poor
Ch25
Good
Ch35
Good
Ch46
Good
AVERAGE
STRONG
3
For information about the signal quality of a particular
multiplex, press
s
or
r
to select that multiplex�
4
Press
OK
for a screen showing detailed technical
information about the selected multiplex�
Local Time Settings
• This function allows you to manually set the time.
Please note that if you manually change the time
setting, all existing entries under Programme Timers
will become invalid as they are still based on the old
time� It is recommended that you delete all entries under
Programme Timers before proceeding with the steps
described below�
1
From the
DTV Settings
menu, press
s
or
r
to
select
Local Time Setting
�
2
Press
OK
and press
v
or
w
to set as required�
Local Time Setting
Local Time
11:30
Performing a Software Upgrade
Auto Upgrade
When
Auto Upgrade
is set to
On
, the television will
automatically upgrade while in standby if new software is
available�
1
From the
System Setup
menu, press
s
or
r
to
select
Software Upgrade
and press
OK
�
2
Press
s
or
r
to select
Over-the-air Upgrade
and
press
OK
�
3
Press
s
or
r
to select
Auto Upgrade
�
4
Use
v
or
w
to select
On
or
Off
�
Searching for New Software
If preferred, software upgrades can be searched for
manually using
Search for New Software
�
1
From the
System Setup
menu, press
s
or
r
to
select
Software Upgrade
and press
OK
�
2
Press
s
or
r
to select
Over-the-air Upgrade
and
press
OK
�
3
Press
s
or
r
to select
Search for New Software
�
4
Press
OK
� The television will automatically start
searching for a software upgrade, the progress bar will
move along the line�
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found, the television will
automatically start downloading� If not, a screen will
appear stating that an upgrade is unavailable�
110920c1_55WL800AZ_En.indb 46
11.9.21 11:37:30