41
Using the TV’s features (General)
Initial Speaker Setting
This feature allows the
Initial Speaker Setting
to be set
to
TV Speakers
or
Amplifier
� The
Amplifier
option
allows the remote control to adjust or mute the volume of
the external audio�
Notes:
•
When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound
will be output from the amplifier’s speakers even
if
TV Speakers
has been selected. Turn the TV to
standby and on again to output the sound from the
TV speakers.
•
The above functions are dependent on the
connected device and TV setting.
Position Key Pass Through
When
Position Key Pass Through
for the selected
HDMI input mode is set to
On
, the
P
U
,
P
u
and number
(0-9) keys on the remote control will pass through� When
in
Off
, those operate as TV programme selection keys�
REGZA-LINK one touch play
When a connected device is switched on, REGZA-LINK
will automatically switch the TV to the appropriate HDMI
input� Also, if the TV is in standby, it will be switched on
automatically�
These functions can be enabled or disabled from the
REGZA-LINK
Setup
�
Note:
Even if the device is only showing a menu, the TV
may automatically switch to that input source.
REGZA-LINK system standby
This feature automatically puts the connected device into
standby when the TV goes into standby and vice versa�
REGZA-LINK system audio control
Using the Speaker Preference feature allows the TV
remote control to adjust the volume or mute the sound of
the speakers connected to the TV via an AV amplifier.
Ensure that the connected AV amplifier and REGZA-
LINK device are selected in the input source selection
and that
Initial Speaker Setting
is set to
Amplifier
in
the
REGZA-LINK
Setup
menu or in the
Quick Menu
(
Speakers
)�
Notes:
•
The above functions are dependent on the
connected device and TV setting.
•
When you turn on the AV amplifier, change its input
source, or adjust the sound volume, the sound will
be output from the AV amplifier’s speakers even if
TV Speakers
has been selected for
Initial Speaker
Setting
. Turn the TV first to standby and on again
to output the sound from the TV speakers.
•
The proper function may not work when operating
the AV amplifier.
REGZA-LINK input source selection
When devices that use CEC technology have been
connected, the REGZA-LINK icon will be displayed in
the input source list�
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
REGZA-LINK
To select the REGZA-LINK input source, refer to
“Selecting the video input source” on page 39�
Notes:
•
This function depends on the devices connected.
•
If you select the REGZA-LINK input source from the
popup window, some REGZA-LINK devices may
automatically turn on.
•
When the TV is switched on, it will take a few
minutes for the
REGZA-LINK
icon to appear in the
list; when an HDMI cable is removed, it will take a
few minutes for the icon to disappear.
•
If the HDMI cable from a connected device or an
HDMI setting for a connected device is changed,
Enable REGZA-LINK
in the
REGZA-LINK
Setup
menu may need to be reset to
On
.
REGZA-LINK Device Control
With the REGZA-LINK mode on your television’s remote
control, you can control the connected REGZA-LINK
device you are watching�
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection�
1
Press
QUICK
to open the
Quick Menu
�
2
Press
s
or
r
to select
REGZA-LINK Device
Control
and press
OK
�
Root Menu
Recorder
REGZA-LINK Device Control
Eject
Power
Contents Menu
Setup Menu
Top Menu
DVD Menu
Audio
3
Press
s
or
r
to select a control option and press
OK
�
110920c1_55WL800AZ_En.indb 41
11.9.21 11:37:29