![Torqeedo Cruise 10 FP TorqLink Скачать руководство пользователя страница 96](http://html1.mh-extra.com/html/torqeedo/cruise-10-fp-torqlink/cruise-10-fp-torqlink_translation-of-the-original-operating-instructions_1134501096.webp)
Error messages
DE
EN
Display
Cause
Troubleshooting
E75
Pyro-fuse trips
Contact Torqeedo Service.
E76
Undervoltage of battery
Charge battery.
E77
Overvoltage while charging
Remove charger unit (use only Torqeedo charger unit).
Switch battery on and off.
E78
Overcharging of battery
Remove charger unit (use only Torqeedo charger unit).
Switch battery on and off.
E79
Battery has electronics defect
Contact Torqeedo Service.
E80
Deep discharge
Contact Torqeedo Service.
E81
Water sensor is triggered
Ensure that the battery environment is dry; if necessary, clean the battery
and water sensor.
Switch battery on and off.
E82
Differing state of charge of multiple batteries
Remove the wiring of the battery bank, and fully charge each battery
individually.
E83
Version error for battery software
Batteries with different software versions have been connected together.
Contact Torqeedo Service.
E85
Imbalance of a battery
During the next charging process, do not disconnect the charger unit after
the battery is fully charged.
After the end of the charging process, leave the charger unit connected for
at least 24 hours longer.
For any error which is not listed, and for any error which cannot be corrected through the measures described above, contact Torqeedo Service or an authorised Service
Partner.
page 96 / 116