Startup
EN
DE
5. Screw the mounting flange (5) tightly in place from the inside, using M10 nuts (1)
(max. torque 37 +/- 3 Nm).
ADVICE
Depending on the construction of the hull, a suitably dimensioned packing
plate may be required in the boat between the hull and the securing nuts.
Ensure that the boat’s hull is sufficiently strong for mounting the pod drive,
and for the resulting drive forces.
Depending on the propeller used, the Cruise 10.0 FP can provide a thrust
force of up to 2400 N.
page 77 / 116
