Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 2 hours
• Torque the front and rear wheel nuts.
After the first 8 hours
• Check condition and tension of the alternator belt.
After the first 10 hours
• Torque the front and rear wheel nuts.
• Check the adjustment of the shift cables.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil filter (TC Models only)
After the first 50 hours
• Change engine oil and filter.
• Adjust the engine valve clearance.
Before each use or daily
• Check engine oil level.
• Check the level of coolant.
• Check the transaxle/hydraulic fluid level.
• Check the high flow hydraulic fluid level (TC models only).
• Check the tire pressure.
• Check the brake fluid level.
• Check the operation of the interlock system.
• Drain water or other contaminants from the water separator.
• Remove debris from the engine area and radiator. (Clean more frequently in dirty
conditions.)
Every 50 hours
• Check the battery fluid level. (Every 30 days if in storage)
• Check the battery cable connections.
Every 100 hours
• Check the level of front differential oil (four wheel drive models only).
• Grease all bearings and bushings. (Lubricate more frequently in heavy duty
applications)
• Check the condition of the tires.
Every 150 hours
• Change engine oil and filter.
Every 200 hours
• Torque the front and rear wheel nuts
• Change the air cleaner filter. (more frequently in dusty or dirty conditions)
• Inspect the constant velocity boot for cracks, holes, or a loose clamp.
• Check the adjustment of the shift cables.
• Check the adjustment of the high–low cable.
• Check the adjustment of the differential lock cable.
• Check the adjustment of the parking brake.
• Check the adjustment of the brake pedal.
• Check condition and tension of the alternator belt.
• Check the adjustment of the clutch pedal.
• Inspect the service and parking brakes.
Every 400 hours
• Check the fuel lines and connections.
• Replace the fuel filter canister.
• Check the front wheel alignment.
• Visually inspect the brakes for worn brake shoes.
Every 600 hours
• Adjust the engine valve clearance.
34
Содержание workman HDX-D 07368
Страница 41: ...Figure 44 Figure 45 41...
Страница 58: ...Schematics Hydraulic Schematic Rev B High Flow Hydraulics Schematic TC models only Rev A 58...
Страница 59: ...Electrical Schematic Rev D 59...