Maintenance Service
Interval
Maintenance Procedure
Every 800 hours
• Change the front differential oil.
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil (TC Models only)
• Change the high flow hydraulic oil filter (TC Models only)
Every 1,000 hours
• Change the brake fluid.
• Drain/flush the fuel tank.
• Flush/replace the coolant system fluid.
Note:
Determine the left and right sides of the machine from the normal operating position.
Only qualified and authorized personnel shall be permitted to maintain, repair, adjust, or inspect
the vehicle.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an open
flame to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open pans of fuel
or flammable cleaning fluids for cleaning parts.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Service Interval Chart
Figure 32
35
Содержание workman HDX-D 07368
Страница 41: ...Figure 44 Figure 45 41...
Страница 58: ...Schematics Hydraulic Schematic Rev B High Flow Hydraulics Schematic TC models only Rev A 58...
Страница 59: ...Electrical Schematic Rev D 59...
