Toro Multi Pro 5800, Руководство оператора

Страница: 25 / 36

2. Press button 4 to select
SPEED
calibration option
( Figure 70 ).
3. Press buttons 1 or 2 to navigate to the
SPEED
option ( Figure 71 ).
g193671
Figure 71
4. Press buttons 3 or 4 to raise or lower the
simulated speed (
Figure 71 ).
5. Press button 2 to navigate to the
ON
/
OFF
option
( Figure 72 ).
g193669
g193670
Figure 72
6. Press button 4 to toggle O
N
or O
FF
the test
speed simulation ( Figure 72 ).
7. Press button 5 to save your settings and exit the
TEST SPEED
screen, and return to the
CALIBRATE
screen ( Figure 72 ).
Using the Manual Cal Entry
Use the manual cal entry screen to view the calibration
values for 3-sprayer section (boom), 2-sprayer section
(boom), 1-sprayer section (boom), and the speed.
Important:
These calibration entries are the
numbers used for calculating the flow and speed
correction factors. Do not change these numbers.
Use the
Flow Calibration (page 14) and Speed
Calibration (page 22) procedures.
1. Press buttons 1 or 2 on the
CALIBRATE
sub-menu
to navigate to the
MANUAL CAL ENTRY
option
( Figure 73 ).
g193322
Figure 73
2. Press button 4 to select Speed calibration option
(
Figure 73 ).
3. Press buttons 1 or 2 to select the boom flow or
speed option (
Figure 74 ).
25