Toro Multi Pro 5800, Руководство оператора

Страница: 23 / 36

7. Mark a finishing line on a testing area of turf
(
Figure 33 ).
8. Press button 2 to move the next step ( Figure 64 ).
9. Enter the Use buttons 3 or 4 to change the
entered-distance value the InfoCenter and press
button 2 (
Figure 65 ).
g192348
Figure 65
1. Entered-distance value
Performing the Speed Calibration
1. Move the machine to align the front tires on the
starting line.
2. At the center console of the machine, ensure
that the switches for the 3 section valves are in
the O
FF
position.
g192356
g192354
Figure 66
1. Left-section switch 3. Right-section switch
2. Center-section switch
3. Press button 2 on the InfoCenter and drive to
the finishing line (
Figure 66 and Figure 63 ).
Note:
The measured-distance value should
rise.
4. Press button 2 (D
ONE
) when the front tire of the
machine is on the finish line ( Figure 67 ).
Note:
If the measured-distance value and
the entered-distance value do not match, the
computer of the sprayer system automatically
corrects the measured-distance value.
23