Toro Multi Pro 5800, Руководство оператора

Страница: 18 / 36

g192867
g192944
Figure 47
1. Left spray-section switch 3. Right spray-section switch
2. Center spray-section
switch 4. Master section switch
2. Press button 2 to advance to the next step
(
Figure 47 ).
3. At the Repeat the Following Test screen, press
button 2 to start the sprayer section catch test
(
Figure 48 ).
g192945
Figure 48
Performing the Sprayer Section Catch Test
Note:
Ready the graduated catch container.
1. Set the master section switch to the O
N
position
( Figure 47 ).
2. Use the application-rate switch to adjust the
sprayer system pressure to approximately 276
kPa (40 psi); refer to
Figure 49 .
g192699
Figure 49
1. Pressure gauge (sprayer
system) 2. Application-rate switch
3. Set the master section switch to the O
FF
position
( Figure 47 ).
4. At the catch test playback screen, confirm the
number of booms, the nozzle color, and press
button 3 to start the catch test (
Figure 50 ).
Note:
You have 14 seconds to move to the
back of the machine and position the graduated
catch container under a spray nozzle for the
catch test period.
18