Toro Multi Pro 5800, Руководство оператора

Страница: 20 / 36

system pressure and proceed to the next
step.
•
If the volume is too high, use the
application-rate switch to lower the sprayer
system pressure and proceed to the next
step.
9. Repeat steps 4 through 8 until the volume of
fluid in the graduated catch container ± 7.4 ml
(1/4 fl oz) of the Target Volume displayed on the
InfoCenter screen.
10. Press button 2 to proceed to Performing the
Calibration Calculation (page 20) .
Performing the Calibration Calculation
1. Set the master section switch to the O
N
position
( Figure 53 ).
g192853
Figure 53
2. Press button 2 to advance to begin the
calibration calculation (
Figure 53 ).
Note:
The InfoCenter displays the calibration in
process screen ( Figure 54 ).
Note:
The sprayer sections sprays out for 3
minutes while the machine is calculating the
calibration correction.
g192852
Figure 54
When the calibration process ends 1 of the
following messages is displayed:
•
A message displays confirming that the flow
calibration is successful (
Figure 55 ).
g192866
Figure 55
•
A message displays indicating that the flow
calibration has failed (
Figure 56 ).
g192865
Figure 56
20