Toro Multi Pro 5800, Руководство оператора

Страница: 13 / 36

g224287
Figure 33
4. Press button 3 or button 4 to lower or raise the
boom width value (
Figure 33 ).
5. Press button 5 to save your settings and exit the
BOOM WIDTH
screen, and return to the
SETTINGS
screen ( Figure 33 ).
Resetting the Default Settings
1. Press button 2 on the
SETTINGS
screen until you
reach the
RESET DEFAULTS
option ( Figure 34 ).
g191706
Figure 34
2. Press button 4 to select the
RESET DEFAULTS
entry ( Figure 34 ).
3. Press button 1 or 2 to select 1 of the following
options that you want to reset to factory setting:
•
Display
•
Flow Calibration
•
Speed Calibration
•
All Others
g191707
Figure 35
4. Press button 4 to reset the settings for the
selected option (
Figure 35 ).
5. Repeat steps 3 and 4 for other options that you
want to reset ( Figure 35 ).
6. Press button 5 to save your settings and exit
the
RESET DEFAULTS
screen, and return to the
SETTINGS
screen ( Figure 35 ).
Setting the GeoLink Option
1. Press button 1 or 2 on the
SETTINGS
screen until
you reach the
GEOLINK
option ( Figure 36 ).
g191703
Figure 36
2. Press button 4 to select the GeoLink entry
(
Figure 36 ).
3. On the GeoLink menu, press button 4 to select
the Yes option or press button 4 to select the
No option, and press the button 5 to save your
settings and exit the menu (
Figure 37 ).
Note:
Turn on the GeoLink setting only if you
have the optional GeoLink system installed on
the machine.
13