Toro 75500, Руководство оператора, Страница: 31 / 36

Storage
Cleaning and Storage
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake
2. Shut off the machine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove grass clippings, dirt, and grime from the
external parts of the entire machine, especially
the motor.
4. Check the parking brake operation; refer to
Parking-Brake Lever (page 14) .
5. Grease the machine; refer to Lubrication (page
25) .
6. Check the tire pressure; refer to Checking the
Tire Pressure (page 27) .
7. Charge the batteries; refer to Charging the
Batteries (page 26) .
8. Scrape any heavy buildup of grass and dirt from
the underside of the mower.
9. Check the condition of the blades; refer to
Servicing the Cutting Blades (page 28) .
10. Check and tighten all fasteners. Repair or
replace any part that is damaged.
11. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
12. Store the machine in a clean, dry garage or
storage area. Remove the key from the switch
and keep it out of reach of children or other
unauthorized users. Cover the machine to
protect it and keep it clean.
Battery Storage
Service Interval: Every 2 months
Important:
Store the batteries between -10 to
40°C (14 to 122°F).
1. Charge the batteries fully before placing the
machine into storage; refer to
Charging the
Batteries (page 26) . Disconnect the charger
when the batteries are fully charged.
2. Charge the battery every 60 days at a minimum.
Important:
Do not leave the charger
connected to the machine while in storage.
31