Toro 75500 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 36

Toro 75500 Скачать руководство пользователя страница 12

decal134-6028

134-6028

1.

USB plug

4.

Reverse mowing

2.

Forward

5.

Cruise control

3.

Reverse without mowing

decal134-6900

134-6900

Note:

This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum

recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the

Operator’s Manual

as

well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.

1.

Warning—read the Operator's Manual.

5.

Tipping hazard—do not turn sharply while traveling fast; drive
slowly when turning; only operate up slopes less than 12°;
only operate across slopes less than 12°.

2.

Cutting/dismemberment hazard of hand or foot, mower
blade—keep away from moving parts; keep all guards and
shields in place.

6.

Tipping hazard—do not use dual ramps when loading onto a
trailer; use 1 ramp wide enough for the machine; use a ramp
with a slope less than 12°; back up the ramp when loading the
machine and drive forward off the ramp when unloading.

3.

Runover hazard—do not carry passengers; look behind you
when mowing in reverse.

7.

Caution—wear hearing protection; wear eye protection.

4.

Thrown object hazard—pick up debris before operating; keep
the deflector in place; keep bystanders away.

8.

Caution—shut off the engine and remove the key before
performing maintenance.

12

«
...
10
11
12
13
14
...
»

Содержание 75500





































Отзывы:

Нет отзывов