
Reverse-Mowing Operation (RMO)
Button
Use the reverse-mowing operation (RMO) button to
operate the mower blades while driving the machine
in reverse.
Engage the reverse-mowing mode in the following
ways:
•
Before engaging the blades
– Press the reverse-mowing button, engage
the mower blades, then move the drive-mode
switch to the R
EVERSE
position.
– Engage the mower blades, press the
reverse-mowing button, then move the
drive-mode switch to the R
EVERSE
position.
•
While mowing in the forward direction
– Press the reverse-mowing button, then move
the drive-mode switch to the R
EVERSE
position.
– Move the drive-mode switch to the R
EVERSE
position, disengage the mower blades, press
the reverse-mowing button, then engage the
mower blades.
Cruise-Control Operation (CCO)
Button
Use the cruise-control (CCO) button to maintain the
traction speed without your foot on the pedal.
Press the traction-control pedal to the desired
speed, hold the cruise-control button approximately 3
seconds, then release your foot from the pedal.
Press the traction-control pedal or brake pedal to
disengage the cruise control.
Battery-Discharge Indicator
The battery-discharge indicator displays the remaining
charge in the batteries. When the batteries are fully
charged, 10 indicator bars light up and disappear
as you use the charge. When the battery charge is
low, the indicator lights display in red and the mower
blades automatically disengage; charge the batteries
when this occurs.
Note:
The battery-discharge indicator does not
display unless the operator is sitting in the operator’s
seat.
Height-of-Cut Lever
Use the height-of-cut lever to lower and raise the deck
from the seated position. Moving the lever toward you
raises the deck from the ground and moving the lever
away from you lowers the deck toward the ground.
Adjust the height-of-cut only while the machine is not
moving.
Specifications
Note:
Specifications and design are subject to
change without notice.
Cutting width
76 cm (30 inches)
Width without deflector
80 cm (31 inches)
Length
148 cm (58 inches)
Weight
188 kg (414 lb)
Height
106 cm (42 inches)
Charging time
11 hours
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
15
Содержание 75500
Страница 33: ...Schematics g355680 Electrical Schematic Rev A 33 ...
Страница 34: ...Notes ...
Страница 35: ...Notes ...