G004971
Figure 130
1.
PTO shaft bearings (2)
3.
Lift arm pivot (1)
2.
Hydraulic cylinder pivot
pins (2)
Electrical System
Maintenance
Important:
Whenever working with the electrical
system, always disconnect the battery cables,
negative (-) cable first, to prevent possible wiring
damage from short-outs.
Checking the Fuses
Refer to the
Operator’s Manual
supplied with the cab for
instructions on fuses.
If the machine has any electrical system issues, check the
fuses. Grasp each fuse and remove them one at a time,
checking to see if any are blown. If you need to replace
a fuse, always use the
same type and amperage rated
fuse
as the one you are replacing,
otherwise you could
damage the electrical system
Note:
If a fuse blows frequently, you probably have a
short in the electrical system and should have it serviced
by a qualified service technician.
45
