Figure 90
1.
Drive shaft
3.
Bolt
2.
Gear box
4.
Roll pin
35. Route and connect the hydraulic pressure and tank
hoses to the valve (Figure 91).
Figure 91
1.
Control valve
3.
Pressure hose
2.
Tank hose
36. Install the rear of the deck lift cylinder onto the pivot
pin and secure with the retaining ring (Figure 92).
37. Secure the front of the lift cylinder to the mower
frame with the cylinder pin and screw (Figure 92).
Figure 92
1.
Deck lift cylinder
3.
Screw
2.
Retaining ring
4.
Cylinder pin & screw
38. Remove the bolts and nuts securing the cab mount
supports to the ROPS posts (Figure 93).
Figure 93
1.
ROPS post
2.
Cab mount support
39. Position the ROPS assembly onto the ROPS posts.
Install the bolt, nut, hair pin cotter and pin securing
each ROPS assembly to the ROPS posts (Figure 94).
34
