Toro 08839, Руководство оператора

Страница: 13 / 64

2. Connect the bottom of the long rear-lift chains to
the hanger tube at the bottom of the lift frame
using flange-head bolts (3/8 x 1-3/4 inches),
washers (2/5 inch), and flange locknuts (3/8
inches) as shown in
Figure 10 .
g392425
Figure 10
1. Flange locknut (3/8 inches) 4. Hanger tube
2. Long rear-lift chain 5. Flange-head bolt (3/8 x
1-3/4 inches)
3. Washer (2/5 inch)
3. Align the rear attachment lift frame under the
machine (
Figure 11 ).
Note:
Ensure that the rear attachment lift frame
is centered under the machine.
g361712
Figure 11
4. Lift the back of the rear attachment lift frame to
align the holes in the lift-frame tubes with the
holes in the channels of the rear frame (
Figure
12 ).
g392387
Figure 12
1. Flange locknut (1/2 inch) 3. Flange-head bolt (1/2 x 3
inches)
2. Tube (rear attachment lift
frame) 4. Channel (rear frame)
Note:
Install the hardware with the bolt heads
toward the outside of the machine.
5. Assemble the 6 flange-head bolts (1/2 x 3
inches) through the holes in the channels and
the tubes.
6. Assemble the 6 flange locknuts (1/2 inch) onto
the flange-head bolts.
7. Torque the flange-head bolts and locknuts to 91
to 113 N∙m (67 to 83 ft-lb).
13