Toro 08839, Руководство оператора

Страница: 20 / 64

Using Stabilizer/Conditioner
Always use fuel stabilizer/conditioner in the machine
to keep the fuel fresh longer.
Important:
Do not use fuel additives containing
methanol or ethanol.
Add the amount of fuel stabilizer/conditioner to fresh
fuel as directed by the fuel-stabilizer manufacturer.
Filling the Fuel Tank
Fuel Tank Capacity: 31.4 L (8.3 US gal)
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
g334006
Figure 24
2. Clean around the fuel-tank cap, and remove it.
3. Fill the fuel tank to 25 mm (1 inch) below the
filler neck.
Note:
Do not fill the fuel tank completely full.
The empty space in the tank allows the fuel to
expand.
4. Assemble the fuel-tank cap to the filler neck of
the tank.
Before Operations Checks
Perform the following daily procedures before
operating the machine:
•
Checking the Engine-Oil Level (page 49)
•
Checking the Tire Air Pressure (page 56)
•
Checking the Hydraulic Lines and Hoses (page
58)
•
Checking the Hydraulic-Fluid Level (page 58)
Checking the
Safety-Interlock System
Service Interval: Before each use or daily
Checking the Parking
Brake-Interlock Switches
1. Stand on the operator’s platform.
2. Disengage the parking brake.
3. Move the motion-control bars to the N
EUTRAL
position.
4. Try starting the engine.
Important:
The engine should not start.
If the engine starts, shut off the engine,
remove the key, and contact you authorized
Toro distributor for service.
Checking the Motion
Control-Interlock Switches
1. Stand on the operator’s platform.
2. Engage the parking brake.
3. Move the left motion-control bar to the F
ORWARD
position.
4. Try starting the engine.
5. Move the right motion-control bar to the
F
ORWARD
position.
6. Try starting the engine.
Important:
The engine should not start.
If the engine starts, shut off the engine,
remove the key, and contact you authorized
Toro distributor for service.
20