Toro 08839, Руководство оператора

Страница: 60 / 64

Changing the Hydraulic
Fluid
Service Interval: Every 300 hours
Draining the Tank
Hydraulic-tank capacity: 28.4 L (7.5 US gallons)
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page 44) .
2. Remove the hood; refer to Removing the Hood
(page 45) .
3. Align a drain container with a 30 L (8 US gallons)
or larger capacity under the forward corner of
the hydraulic tank (
Figure 95 ).
g374452
Figure 95
1. O-ring 2. Magnet (drain plug)
4. Remove the drain plug from the tank, and wait
for the hydraulic fluid to drain.
5. Check the drain plug for steel fragments.
Note:
Contact your authorized Toro distributor
if the end of the plug is covered with steel
fragments.
6. Check the O-ring of the drain plug for damage
or wear.
Important:
Replace a damaged or worn
O-ring.
Filling the Tank
1. Wipe clean the drain plug and install it into the
tank.
2. Add 28.4 L (7.5 US gallons) of the specified
hydraulic fluid into the hydraulic tank.
3. Check the drain plug for leaks.
Important:
Repair all hydraulic leaks.
4. Install the hood; refer to Installing the Hood
(page 45) .
60