Tormatic POWERSLIDE, Инструкция по эксплуатации

Страница: 56 / 92

PowerSlide 26
ENGLISH
Access Controls
Check that the gate opens only when an authorised user is recognised. 12
Complete Automation System
Check that the automation system operates correctly, following the set logic,
when using the various control devices.
12
Check that the gate moves correctly - smooth, regular and without abnormal
noise.
12
Check that both the opening and closing speed are correct and that the stop
positions and slow-downs provided for are respected.
12
Check that the manual release operates correctly: when the release mechanism
is activated, it must only be possible to move the gate manually.
6
Check that the caps on the locks are present.
Check that the maximum force required for manual movement of the gate is
below 225 N in residential areas and 390 N in industrial or commercial settings. 6
Check that the safety edges operate correctly when faced with an obstacle. 6
Check that the encoder (where present) functions correctly when an obstacle
is detected.
6
Check that each pair of photocells is working correctly. 6
Check that there is no optical/light interference between the pairs of photocells. 6
Check the force limitation curve (per EN 12453 and EN 12445). 6
Check that all necessary signage and warnings are present, intact and legible:
residual risks, exclusive use etc.
12
Check that the gate's CE marking and the DANGER, AUTOMATIC MOVEMENT
warning signage is present, intact and legible.
12