Tork DZS200, Руководство по установке и эксплуатации

Страница: 4 / 36

3
OVERRIDE
CH 1
RUN/SET ENTER ADVANCE
DZS 200 TORK
To remove unit, push
tab to right, swing unit
to left and remove.
Use separate dedicated circuit
for Timer and make certain unit
is grounded.
OVERRIDE
CH 2
SU MO TU WE TH FR SA H1 H2
AM
PM
HOLIDAY
TIME/DAY
DATE
SCH/RVU
DLT RVU SET
★
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
To clear all memory,
see Power-Up Check
on page 6.
Dimensions:
3-5/8" D X 9-5/8" H x 5
KO’s bottom and sides
1/2" and 3/4"
CAUTION:
DO NOT USE TOP KO
Use separate dedicate
for Timer and make ce
is grounded.
SIG. TIMER
INPUT
VOLTAGE
GND
CHANNEL #1 CHANNEL #2
LI NEUT N/O C N/C N/O C N/C
NOTE: ON schedule – C and N/O contacts close
OFF schedule – C and N/C contacts close
Dimensions:
4-17/32" D x 9-5/8" H x 6" W.
KO’s bottom, sides, and back 1/2" and 3/4"
KEY DEFINITIONS:
RUN/SET key (1) Transfers the unit from the RUN
mode to the SET modes.
(2) Directly exits from anywhere in
the SET modes to the RUN mode.
ENTER key (1) Selects any flashing symbol on
the display.
(2) Stores programmed information
into memory.
ADVANCE key (1) Advances flashing symbol to the
next selection.
(2) Increments any displayed digit.
4
TABLE OF CONTENTS
Section Description Page
1.0 To Set Time and Day............................. 6
1.1 To Change Time and Day ..................... 7
2.0 To Set Date ........................................... 7
2.1 To Change Date .................................... 8
3.0 To Set Daylight Savings Dates .............. 8
3.1 To Change Daylight Savings Dates....... 10
4.0 To Set Standard ON/OFF Schedule ...... 11
5.0 To Set Signal Duration .......................... 14
5.1 To Set Schedule For Signals ................. 15
6.0 To Set Channel For Sunset ON/
Sunrise OFF ..........................................
18
6.1 To Set Channel for Sunset ON/
Time OFF ..............................................
21
7.0 To Set Holidays ..................................... 22
7.1 To Set Schedule For Holiday Only ........ 25
8.0 To Add/Review/Delete/Modify
Schedules ..............................................
25
9.0 To Review/Modify Signal Durations....... 26
10.0 To Add/Review/Delete/Modify
Holidays .................................................
27
11.0 To Review//Modify/Delete
Sunrise/Sunset Times ...........................
28
12.0 To Go To The Run Mode....................... 29
13.0 Override ................................................. 30
BACK Sample sheets ..................................... 31, 34
Blank scheduling sheets ........................ 33
Block Diagram ....................................... 36