If you want to program an offset to the displayed time,
press ENTER. Press ADVANCE to set the offset min-
utes as before. Press ENTER.
Press RUN/SET when complete to exit to the Run
mode.
6.1 TO SET CHANNEL FOR SUNSET ON/TIME OFF
Follow the preceding directions outlined in section 6.0
to set the channel for astronomic (sunset/sunrise)
operation. This will set the sunset ON time.
Next follow the directions outlined in section 4.0 to set
the time OFF desired.
NOTE: When RVU is flashing, simply press
ADVANCE to proceed. Review will be dis-
cussed later.
NOTE: Do not set a morning off time after 2:30 AM for
latitudes greater than 50 degrees.
Example for Sections 6.0 and 6.1: A company in
N.Y.C. want its parking lot lights (on channel 1) to go
on 10 minutes before sunset and off at 12:30 AM.This
is to occur everyday including holidays.
First we want to set the channel to turn ON at sunset.
Press RUN/SET. The TIME/DAY symbol flashes.
Press ADVANCE 5 times. LATITUDE symbol flashes.
Press ENTER. Latitude digits begin to flash.
Press ADVANCE until latitude shows 41° North.
Press ENTER. “C1” flashes.
Press ENTER. The bar under Sunday flashes.
Press ENTER 9 times to select all days and H1 and
H2. LATITUDE symbol flashes again.
Press ADVANCE. Sunset symbol flashes and sun-
set time is displayed.
Press ENTER. Digits for sunset offset flashes. “+” is
shown in front of it.
Press ADVANCE until the display shows “-10”.
Press ENTER. Sunset symbol flashes again.
Next we will program the 12:30 AM OFF.
21
22
Press RUN/SET. The TIME/DAY symbol flashes.
Press ADVANCE 3 times. SCH/RVU symbol flashes.
Press ENTER. “C1” flashes.
Press ENTER. The bar under Sunday flashes. (If
RVU flashes, press ADVANCE)
Press ENTER 9 times to select everyday and H1
and H2. The dashes for hour flash.
Press ADVANCE. Hour shows “12:00 AM”.
Press ENTER. Digits for minutes flash.
Press ADVANCE until minutes show “30”.
Press ENTER. Bar over ON flashes.
Press ADVANCE. Bar over OFF flashes. Press
ENTER.
We do not need to go to the Sunrise mode since we
don’t need to set a sunrise offset.
Press RUN/SET to go to the Run mode.
NOTE: The sunrise OFF time will be placed in the
schedule area but the lights would already be
off from 12:30 AM.
7.0 TO SET HOLIDAYS
- To Set Single-day Holidays (H1)
If you are in the Run mode, press the RUN/SET key
The TIME/DAY symbol will begin to flash. Press
ADVANCE until the HOLIDAY symbol is flashing. The
display shows
Press ENTER.
The bar under H1 is flashing. Press ENTER.
The left (month) dashes will flash. Press the
ADVANCE key to set the holiday month. Press
ENTER.
21
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
SIG. TIMER
