MON thru FRI, 10:10 AM, SIG. A — End of Break
MON thru FRI, 12:00 PM, SIG. B — Lunchtime
MON thru FRI, 12:30 PM, SIG. B — End of Lunch
MON thru FRI, 3:00 PM, SIG. A — Afternoon Break
MON thru FRI, 3:10 PM, SIG. A — End of Break
MON thru FRI, 4:30 PM, SIG. B — End of Work
First we will set the signal durations.
Press RUN/SET. TIME/DAY symbol flashes.
Press ADVANCE 2 times. SIG. TIMER symbol
flashes.
Press ENTER. “t1” flashes.
Press ADVANCE. “t2” flashes.
Press ENTER. A bar is over SIG. A and its digits
flash.
Press ADVANCE until SIG. A digits show “03”.
Press ENTER. The bar moves over SIG. B and its
digits flash.
Press ADVANCE until SIG. B digits show “10”.
Press ENTER. SIG. TIMER symbol flashes again
and “t1” shows on display.
The signal durations for channel 2 are now set and the
channel is configured for signal timer. Now we must
schedule the signals.
Press ADVANCE. SCH/RVU symbol flashes.
Press ENTER. “c1” flashes.
Press ADVANCE. “t2” flashes.
Press ENTER. Bar under Sunday flashes.
Press ADVANCE to skip SU. Press ENTER 5 times
to select MO, TU, WE, TH, FR. Press ADVANCE 3
times to skip SA, H1, H2. The days are set and the
dashes for hour flashes.
Press ADVANCE until hour shows 8:00 AM.
Press ENTER. Minute digits flash “00”.
Press ENTER. The bar over SIG. A flashes.
Press ADVANCE. The bar over SIG. B flashes.
Press ENTER. The bar under Sunday flashes
again.
The first signal is now in memory. Schedule the other
signals in a similar fashion.
17
Press RUN/SET to go to the Run mode when
scheduling is complete.
6.0 TO SET CHANNEL FOR SUNSET ON/
SUNRISE OFF
CAUTION: MAKE SURE THAT YOU HAVE SET THE
PROPER DATE BEFORE PROCEEDING.
Press the RUN/SET key until the TIME/DAY symbol
begins to flash. Press the ADVANCE until the LATI-
TUDE symbol begins to flash. The display shows
Press ENTER.
The digits for degrees are flashing. Press ADVANCE
to set the latitude where you are. Check your news-
paper or local weather bureau for your latitude.
NOTE: If none of the above sources are available,
use the map on the next page to figure out
your approximate latitude.
To set southern latitudes for below the equator, contin-
ually press ADVANCE until the latitude indicator
changes from “Ln” to “LS”. When the displayed latitude
information is correct, press ENTER to store it.
“C1” is flashing. If you want astronomic (sunrise/sun-
set) operation on channel 1, press ENTER. If not,
press ADVANCE to flash channel 2. Press ENTER to
select that channel for astronomic operation.
18
E
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
17
SIG. TIMER
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
18
SIG. TIMER
SET
