The setting is entered in memory and the display again
shows
The bar under Sunday is flashing.
Proceed as before to enter more schedules ON and
OFF. When you are finished entering the schedules for
the channel, press RUN/SET to quickly exit the mode.
You can program the other channel by pressing the
RUN/SET key again. The TIME/DAY symbol will flash.
Use the ADVANCE key to proceed to the SCH/RVU
mode. Proceed as before.
Example: A store light has the following schedule on
channel #1:
MON thru SAT, 7:00 AM, ON
MON thru SAT, 10:30 PM, OFF
SUN, 11:00 AM, ON
SUN, 6:00 PM, OFF
The programming steps are as follows:
Press RUN/SET. TIME/DAY symbol flashes.
Press ADVANCE 3 times. SCH/RVU symbol flashes.
Press ENTER. “C1” flashes.
Press ENTER. The bar under Sunday flashes
(unless a schedule had already been entered, in
which case the RVU will flash – press ADVANCE to
get the bar under SU to flash.)
Press ADVANCE to skip SU. Press ENTER 6 times
to select Monday through Saturday. Press
ADVANCE 2 times to skip H1 and H2. The days are
selected and the dashes for the hour is flashing.
Press ADVANCE until the hour shows 7:00 AM.
Press ENTER. Minutes are flashing “00”. Press
ENTER. Bar over the “ON” flashes. (If bar was over
13
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
11
SIG. TIMER
AM
14
the “OFF”, press ADVANCE to move it to “ON”.)
Press ENTER. The bar under Sunday flashes again.
The first setting is entered into memory. You can now
program the others in a similar fashion. Press
RUN/SET when finished to go to the RUN mode.
5.0 TO SET SIGNAL DURATION
NOTE:
If a channel is to be used as a signal timer,
set the signal duration first. If any regular
ON/OFF schedules had been entered, you
must delete them.
From the RUN mode, press the RUN/SET key. The
TIME/DAY symbol is flashing. Press ADVANCE until
the SIG. TIMER symbol is flashing. The display shows
Press ENTER.
“t1” is flashing. If signal output is desired on channel 1
press ENTER while this is flashing. If channel 2 is
desired as a signal timer, press ADVANCE to flash “t2”
then press ENTER.
A bar appears over SIG. A and the left pair of digits are
flashing. Press ADVANCE to set the signal duration
desired for the channel (1-99 secs.) Press ENTER.
A bar appears over SIG. B and the right pair of digits
are flashing. If you desire a second signal duration for
the channel, press ADVANCE to set it and then press
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
12
SIG. TIMER
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
13
SIG. TIMER
SET
